Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC:

New rubbers or spare carbs, can't afford both??? 9 years 3 months ago #8504

  • charlie9670
  • charlie9670's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 269
  • Thank you received: 13
Any advice welcome. I can spend £100 on 3 new airbox rubbers which may be causing the low rev carb issue I have but I have found a set of carbs for £175 history unknown (not that I believe what people say always)I'm thinking a spare set of carbs cleaned and set as well as I can will be a very usefull item as they are hard to find, or should I just fix what I know is wrong...the airbox rubbers, if I pass the carbs up I may never find another set at an affordable price..thoughts anyone, thanks....oh for a healthy bank account!
:) Z13 UK

Please Log in or Create an account to join the conversation.

New rubbers or spare carbs, can't afford both??? 9 years 3 months ago #8507

  • Ledkz1300
  • Ledkz1300's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 717
  • Thank you received: 76
I'd buy the rubbers. Carb kits can be had fairly easily.

My advise should be suspect because I'm a newb and not a mechanic. :cheer:

Please Log in or Create an account to join the conversation.

New rubbers or spare carbs, can't afford both??? 9 years 3 months ago #8508

  • McZed
  • McZed's Avatar
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 219
  • Thank you received: 26
I'd buy the carbs, at that price they are a bargain. The rubbers appear on e-bay more often than carbs. B)
Z1300 UK

Please Log in or Create an account to join the conversation.

New rubbers or spare carbs, can't afford both??? 9 years 3 months ago #8516

  • Kawboy
  • Kawboy's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 3120
  • Thank you received: 1093
There isn't a set of carbs out there that can't be "brought back from the dead" I've overhauled a set for a cost of $15.00 AND that's with upgraded Viton 75 O-rings which I feel is a must now that we have ethanol in our gasoline.
I would say the air box rubbers are really important. On the front face of the carb are 2 air bleed orifices with metered jets around .005"-.010" sizing. If they plug up with debris, you'll have issues. Air leakage past the air box boots is unfiltered. Also the throttle slides are a really tight fit and need to be able to fall under gravity. Dirt on the slides is unwelcomed.

My 2 cents.
KB

Please Log in or Create an account to join the conversation.

New rubbers or spare carbs, can't afford both??? 9 years 3 months ago #8519

  • Ledkz1300
  • Ledkz1300's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 717
  • Thank you received: 76
Do you have a link for the airbox rubbers? Is it ebay or someone else? I've just discovered I have at least one with a tear in it.

Your timing may be great :)

Please Log in or Create an account to join the conversation.

New rubbers or spare carbs, can't afford both??? 9 years 3 months ago #8524

  • charlie9670
  • charlie9670's Avatar Topic Author
  • Offline
  • Elite Member
  • Elite Member
  • Posts: 269
  • Thank you received: 13
www.z1300.de/ Thanks for opinions, my gut feeling is for the carbs, I'll mull it over and probably make the wrong decision, but if I was sensible I wouldn't have spent more than I could afford on a 13 :silly:
:) Z13 UK

Please Log in or Create an account to join the conversation.

Last edit: by charlie9670.
  • Page:
  • 1
  • 2
Time to create page: 0.058 seconds
Powered by Kunena Forum