Timing advancer and gear needed
- Ledkz1300
-
Topic Author
- Offline
- Platinum Member
-
- Posts: 717
- Thanks: 76
Timing advancer and gear needed
9 years 2 weeks ago
In the process of taking the engine apart I ended up breaking the timing advancer and gear.
Part numbers are 16085-1009 and 21148-1008.
Does anyone have a source for these? My supplier says on backorder which means not in stock and probably never will be. I can take them out of spare motor but would prefer to have new.
Anyone have a source for these parts?
Thanks!
Part numbers are 16085-1009 and 21148-1008.
Does anyone have a source for these? My supplier says on backorder which means not in stock and probably never will be. I can take them out of spare motor but would prefer to have new.
Anyone have a source for these parts?
Thanks!
Please Log in or Create an account to join the conversation.
- kwak1261
-
- Offline
- Platinum Member
-
- Posts: 477
- Thanks: 72
Re: Timing advancer and gear needed
9 years 2 weeks ago - 9 years 2 weeks ago
We have a company here in the UK " Two Wheel Spares "
they tend to break a lot of Z1300 motors, might be worth emailing them and asking
stores.ebay.co.uk/dkmotorcyclespares
they tend to break a lot of Z1300 motors, might be worth emailing them and asking
stores.ebay.co.uk/dkmotorcyclespares
Z1300 A4 ZG1300 DFI X2
Z1261J GS1000S
Vmax1200 XT500
Z1261J GS1000S
Vmax1200 XT500
Last edit: 9 years 2 weeks ago by kwak1261.
Please Log in or Create an account to join the conversation.
- Tonto
-
- Offline
- Sustaining Member
-
- Posts: 501
- Thanks: 133
Re: Timing advancer and gear needed
9 years 2 weeks ago - 9 years 2 weeks ago
Hi, there is one on eBay at the minute - cant seem to post the eBay link, but here's the ref number 161646709743
KAWASAKI Z1300 KZ1300 TIMING ADVANCER NOS 1979 - 1981 NLA 21148-1008
Cheers Tim
KAWASAKI Z1300 KZ1300 TIMING ADVANCER NOS 1979 - 1981 NLA 21148-1008
Cheers Tim
"Success consists of going from failure to failure without the loss of enthusiasm " Winston Churchill.
Last edit: 9 years 2 weeks ago by Tonto.
The following user(s) said Thank You: Ledkz1300
Please Log in or Create an account to join the conversation.
- Ledkz1300
-
Topic Author
- Offline
- Platinum Member
-
- Posts: 717
- Thanks: 76
Re: Timing advancer and gear needed
9 years 2 weeks ago - 9 years 2 weeks ago
Thanks Fellas.
I thought I could save myself some grief since I have a complete spare bike for parts. Too bad the spare is an 81 and as you all know the ignition system different than the other KZ1300 motors. So the parts I need don't exist on the spare motor... or rather they are different or in a different location.
However, when I look online at the part numbers it says that they both fit 79-81 A1, A2, A3
I'm very confused. My 81 doesn't even have the cover on the right side where this is found under. Is it the same part in a different location?
I thought I could save myself some grief since I have a complete spare bike for parts. Too bad the spare is an 81 and as you all know the ignition system different than the other KZ1300 motors. So the parts I need don't exist on the spare motor... or rather they are different or in a different location.
However, when I look online at the part numbers it says that they both fit 79-81 A1, A2, A3
I'm very confused. My 81 doesn't even have the cover on the right side where this is found under. Is it the same part in a different location?
Last edit: 9 years 2 weeks ago by Ledkz1300.
Please Log in or Create an account to join the conversation.
- Ledkz1300
-
Topic Author
- Offline
- Platinum Member
-
- Posts: 717
- Thanks: 76
Re: Timing advancer and gear needed
9 years 2 weeks ago
I purchased that timing advancer from that Ebay link, Tonto. Thank you! A little overpriced but what can you do when there aren't many around?
I'm still looking for the timing advance gear. That ebay sellers didn't have one, I asked.
Is it possible that the timing advance gear lurks somewhere inside my 81?
I'm still looking for the timing advance gear. That ebay sellers didn't have one, I asked.
Is it possible that the timing advance gear lurks somewhere inside my 81?
Please Log in or Create an account to join the conversation.
- kwak1261
-
- Offline
- Platinum Member
-
- Posts: 477
- Thanks: 72
Re: Timing advancer and gear needed
9 years 2 weeks ago - 9 years 2 weeks ago
Z1300 A4 ZG1300 DFI X2
Z1261J GS1000S
Vmax1200 XT500
Z1261J GS1000S
Vmax1200 XT500
Last edit: 9 years 2 weeks ago by kwak1261.
The following user(s) said Thank You: Ledkz1300
Please Log in or Create an account to join the conversation.
Time to create page: 0.197 seconds