kz1300 banner
If you make pieces and parts or provide services for Kawasaki Sixes you may post links here to your business or product catalog. If you're just into 1300's and have found a business that you like to deal with post it up here.

Legend Motorcycles Parts

  • biltonjim
  • Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
More
5 years 10 months ago #22781 by biltonjim
Legend Motorcycles Parts was created by biltonjim
www.legendmotorcycles.com/

I bought some KZ1300 inlet rubbers from this company They sell a few items for the 1300. I like the look of the stainless cylinder head nuts
The following user(s) said Thank You: Kawboy

Please Log in or Create an account to join the conversation.

More
5 years 10 months ago #22784 by Frank833
Replied by Frank833 on topic Legend Motorcycles Parts
I bought throttle cables from them because most folks where trying to sell one cable for use in both spots (one is actually a bit longer than the other). Took about 10 days to get to Texas and that was between Thanksgiving and Christmas.

The head nuts are available from Kawi, but new ones don’t look good - the centers are welded before plating. These Stainless ones are better if you are happy with the look of them.
The following user(s) said Thank You: biltonjim, StanG

Please Log in or Create an account to join the conversation.

More
5 years 10 months ago #22790 by StanG
Replied by StanG on topic Legend Motorcycles Parts
Right on with the cables. Most people don't realize this.

Please Log in or Create an account to join the conversation.

  • LareNurminen
  • Offline
  • Sustaining Member
  • Sustaining Member
More
5 years 9 months ago #23369 by LareNurminen
Replied by LareNurminen on topic Legend Motorcycles Parts
I bought the carb rubbers from them and found the quality of the product OK. The plastic material is flexible and they were moderately easy to fit. The diameter is a bit small so they did not quite support themselves around the airbox opening. I used a few drops of superglue to get them to stay oval during fitting and it worked ok.
The following user(s) said Thank You: biltonjim

Please Log in or Create an account to join the conversation.

Time to create page: 0.122 seconds
Powered by Kunena Forum