- Posts: 456
- Thank you received: 108
Long-Term Wants- Rear Master Lid and Airbox Top
- Lucien-Harpress
- Topic Author
- Offline
- Platinum Member
Less
More
2 years 9 months ago - 2 years 9 months ago #30120
by Lucien-Harpress
Long-Term Wants- Rear Master Lid and Airbox Top was created by Lucien-Harpress
My KZ is mostly good, but I've got a couple of long-term wants, if I can get them for something less than an arm and a leg.
--First up is an airbox top. NOT the tool tray top, but the trangular-ish part that holds the carb intake rubber boots and the top grommets to the airbox sidecovers. Mine "works", but the mounts that holds one of the grommets is broken, so I wouldn't mind replacing this if I could.
--Second, I'm looking for the lid to the rear master cylinder. No rubber bits, not the main bit of the master, JUST the lid. Again, I've got parts that work just fine, this is more for period-correctness than anything. If I can get this without breaking the bank, all the better.
Thanks in advance.
--First up is an airbox top. NOT the tool tray top, but the trangular-ish part that holds the carb intake rubber boots and the top grommets to the airbox sidecovers. Mine "works", but the mounts that holds one of the grommets is broken, so I wouldn't mind replacing this if I could.
--Second, I'm looking for the lid to the rear master cylinder. No rubber bits, not the main bit of the master, JUST the lid. Again, I've got parts that work just fine, this is more for period-correctness than anything. If I can get this without breaking the bank, all the better.
Thanks in advance.
Last edit: 2 years 9 months ago by Lucien-Harpress.
Please Log in or Create an account to join the conversation.
- PaulD
- Offline
- Premium Member
Less
More
- Posts: 126
- Thank you received: 29
2 years 9 months ago #30121
by PaulD
Replied by PaulD on topic Long-Term Wants- Rear Master Lid and Airbox Top
Depending on where in the world you are D&K motorcycles (two wheel spares on eBay) have loads of spares for Z1300’s
Please Log in or Create an account to join the conversation.
Time to create page: 0.118 seconds