kz1300 banner

Welcome, Guest
Username: Password: Remember me

TOPIC: ZG1300 project

ZG1300 project 3 weeks 4 hours ago #25861

  • Jorgeno
  • Jorgeno's Avatar Topic Author
  • Offline
  • Senior Sixer
  • Senior Sixer
  • Posts: 47
  • Thank you received: 7
Hi. Need some second opinion. I’m rebuilding the rear shocks. I was trying to get the old sealing out when my hand slipped and the screwdriver made a nice mark in the fork bushing :ohmy:

I wonder how critical it is? I mean, the new seal will keep the oil inside. So, what will happen if I just leave it and just put the new seal back?
ZG1300-6 86
ZN1300 86
GS1000G 82
GR650 83
Attachments:

Please Log in or Create an account to join the conversation.

ZG1300 project 1 week 4 days ago #25912

  • Jorgeno
  • Jorgeno's Avatar Topic Author
  • Offline
  • Senior Sixer
  • Senior Sixer
  • Posts: 47
  • Thank you received: 7
Thanks to metalguru’s great thread in how to rebuild the rear shocks: www.kz1300.com/index.php/forum/suspensio...r-ride-shock-rebuild

I have now finished rebuilding my shocks.
I used a syringe to add new oil. About 240 ml in each shocks and set the air pressure to 30 PSI

If this works great then my shocks are now possible to change oil and gasket easily. Time will tell. :)
I attach some pictures.
ZG1300-6 86
ZN1300 86
GS1000G 82
GR650 83

Please Log in or Create an account to join the conversation.

Last edit: by Kawboy.
Time to create page: 0.128 seconds
Powered by Kunena Forum