Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Technical Fourms
Engines
Another surprise
  • Page:
  • 1
  • 2

TOPIC:

Another surprise 6 years 6 months ago #19567

  • dmerc
  • dmerc's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 21
  • Thank you received: 1
Was bolting on the oil pan when I discovered a roller that looks like it came out of a roller bearing . This was in the bag labeled oil pan bolts. Curious thing is that it's not metric. Measures .125 X .625 There is a large roller bearing in the trans. But the drawings look like it's a caged bearing. I sure don't want to take this thing apart again. Any one have one of those bearings kicking around to measure ?

Please Log in or Create an account to join the conversation.

Another surprise 6 years 6 months ago #19570

  • Ledkz1300
  • Ledkz1300's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 717
  • Thank you received: 76
I don't know which one you mean but I have a complete transmission in pieces so if you post a picture I'll look for it in the transmission box to see if I can find a match and measure it.
The following user(s) said Thank You: dmerc

Please Log in or Create an account to join the conversation.

Another surprise 6 years 6 months ago #19573

  • Bucko
  • Bucko's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 689
  • Thank you received: 169
Could it be a solid dowel pin?
Hello from Canada's We(s)t coast.
The following user(s) said Thank You: Kawboy

Please Log in or Create an account to join the conversation.

Another surprise 6 years 6 months ago #19584

  • dmerc
  • dmerc's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 21
  • Thank you received: 1
Here is a pic of the mystery part
Attachments:

Please Log in or Create an account to join the conversation.

Another surprise 6 years 6 months ago #19586

  • dmerc
  • dmerc's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 21
  • Thank you received: 1
Posted pic for you. Thanks, dave

Please Log in or Create an account to join the conversation.

Another surprise 6 years 6 months ago #19587

  • dmerc
  • dmerc's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 21
  • Thank you received: 1

Bucko wrote: Could it be a solid dowel pin?


It sure could. Wonder where it went, maybe a part from some other project. Basket case bikes are so much fun !!

Please Log in or Create an account to join the conversation.
  • Page:
  • 1
  • 2
Technical Fourms
Engines
Another surprise
Time to create page: 0.042 seconds
Powered by Kunena Forum