stripped screw

stripped screw 10 years 7 months ago #3222

Saxgod Topic Author Offline New Member Posts: 9 Thank you received: 0	Trying to replace my fuel regulator on the 85 zn1300. The screw on the left side (while on the bike) is stripped. I tried a grabit screw out bit and that had no affect. Any ideas? Thanks.
	Please Log in or Create an account to join the conversation. Last edit: by Saxgod.

stripped screw 10 years 7 months ago #3224

RickG Offline Platinum Member Posts: 604 Thank you received: 95	No eBay APP ID and/or Cert ID defined in Kunena configurationUse a Helicoil, it's a stainless steel thread insert easy to do and not too expensive as you may need to use more than 1. Here is some on fleabay but most auto shops will have them and many hardware stores Live your life so that the Westbro Baptist Church will want to picket your funeral Z1300 A1 x 2
	Please Log in or Create an account to join the conversation.

stripped screw 10 years 7 months ago #3225

KZQ
Offline
Administrator
Lifelong Rider Suffering Through MBD
Posts: 1032
Thank you received: 275

Hi Saxgod,

I'm assuming that you're referring to one of the 5mm short phillips screws that secure the regulator to the injector rail. I'd grind off the screw head and use a drift to drive out the stripped screw.

You should have no problem tapping the hole for a 6mm screw.

Bill

1947 Indian Chief, 1968 BSA Shooting Star, 1970 BSA 650 Lightning, 1974 Kawasaki W3, 1976 KZ900 A4, 1979 KZ750 B4, 1979 KZ750 B4 Trike, 1980 KZ550, 1981 KZ1300, 1982 KZ1100 Spectre, 1985 Kawasaki ZN1300, 1987 Yamaha Trail Way, 2000 Honda Valkyrie Tourer, 1981 GL 1100, 2009 Yamaha RoadLiner S

Please Log in or Create an account to join the conversation.

stripped screw 10 years 7 months ago #3227

Saxgod Topic Author Offline New Member Posts: 9 Thank you received: 0	I was thinking of using my dremel and cutting the head but im worried about sparks being that close to everything lol. but I may have to go that route.
	Please Log in or Create an account to join the conversation.

stripped screw 10 years 6 months ago #3240

KZQ
Offline
Administrator
Lifelong Rider Suffering Through MBD
Posts: 1032
Thank you received: 275

I wouldn't worry too much about the sparking issue as long as there isn't an active fuel leak. If the threads on the second screw are good I'd just use a cable wrap through the stripped hole till you take it apart for another reason.

Bill