kz1300 banner

Rattle

  • PaulD
  • Topic Author
  • Offline
  • Premium Member
  • Premium Member
More
2 years 5 months ago #30429 by PaulD
Rattle was created by PaulD
So the onward saga of the poorly Z13 continues 
As if the carb problems ain’t enough to contend with (still playing up) I’ve now got a serious rattle from the bottom end? I’m hoping it’s the starter clutch come loose and is an easy fix but I’ve got a bad feeling about this. It started a while back but originally  I put it down to the cam chain with the carbs being out of balance. At first when I warmed  the motor up at low revs the noise went away after a few seconds but on my last test run after disappearing to start with it came back worse than ever while riding  and weirdly it got worse while hooning around left handers? Any ideas guys? this bike is really testing my patience 

Please Log in or Create an account to join the conversation.

More
2 years 5 months ago #30435 by McZee
Replied by McZee on topic Rattle
Could be any number of things, does the rattle go away when you pull in the clutch? It could just be your clutch plates rattling.
The following user(s) said Thank You: PaulD

Please Log in or Create an account to join the conversation.

  • PaulD
  • Topic Author
  • Offline
  • Premium Member
  • Premium Member
More
2 years 5 months ago #30436 by PaulD
Replied by PaulD on topic Rattle
Thanks for the reply but no it’s definitely not clutch related 

Please Log in or Create an account to join the conversation.

More
2 years 5 months ago #30437 by Kawboy
Replied by Kawboy on topic Rattle
There have been a few reports of the starter clutch coming loose. StanG I believe showed the results of  his back 3 years ago? Try a search on the site. Best I can offer at this point. I'm  in a freakin hospital at the moment  working with a cell phone and no eyeglasses.
The following user(s) said Thank You: PaulD

Please Log in or Create an account to join the conversation.

More
2 years 5 months ago #30438 by Kawboy
Replied by Kawboy on topic Rattle
Maybe this will help. Magneto puller  Don't  worry about the title. Read the link.
The following user(s) said Thank You: PaulD

Please Log in or Create an account to join the conversation.

  • PaulD
  • Topic Author
  • Offline
  • Premium Member
  • Premium Member
More
2 years 5 months ago #30439 by PaulD
Replied by PaulD on topic Rattle

Maybe this will help. Magneto puller Don't  worry about the title. Read the link.

 Thanks for that, fingers crossed that’s the problem. It definitely sounds like the noise is coming from that area of the motor. I’ll pull it apart and report back 
 

Please Log in or Create an account to join the conversation.

Time to create page: 0.131 seconds
Powered by Kunena Forum