- Posts: 883
- Thank you received: 195
Electrical
Replacement Coil Wiring question - eliminating ballast resistor
- dcarver220b
- Topic Author
- Offline
- Sustaining Member
Less
More
1 year 5 days ago #31775
by dcarver220b
Replied by dcarver220b on topic Replacement Coil Wiring question - eliminating ballast resistor
Exactly the same ones I found and installed.
Haven't yet asked them to throw a spark yet, other pieces and parts are disassembled.
Just FYI -
Haven't yet asked them to throw a spark yet, other pieces and parts are disassembled.
Just FYI -
- The leads are 7mm and can be un-screwed from the coil should you want to run pretty yeller or other colored, higher quality wires
- The stand-offs provided no longer match the photo and are not usable. Way too short.
- The wiring loom female spade lugs fit horribly on coil male lugs. Too loose. I found new wire, made my own harness with correct fitting and snug lugs.
- My measured primary resistance is 3.3, 3.4, 3.4 ohms
- The spacing is 100m, correct fit original mounting location if desired.
The following user(s) said Thank You: kawaBCN
Please Log in or Create an account to join the conversation.
- kawaBCN
- Offline
- Elite Member
Less
More
- Posts: 259
- Thank you received: 99
1 year 5 days ago #31776
by kawaBCN
RUN LIKE THE WIND¡¡¡
Replied by kawaBCN on topic Replacement Coil Wiring question - eliminating ballast resistor
Thanks for sharing.
I think I'm not going to change the 7mm cable, I'll use the one that comes mounted on the new coils.
Have you used the old spark plug caps or is it advisable to change them for new ones?
I think I'm not going to change the 7mm cable, I'll use the one that comes mounted on the new coils.
Have you used the old spark plug caps or is it advisable to change them for new ones?
RUN LIKE THE WIND¡¡¡
Please Log in or Create an account to join the conversation.
- dcarver220b
- Topic Author
- Offline
- Sustaining Member
Less
More
- Posts: 883
- Thank you received: 195
1 year 5 days ago #31777
by dcarver220b
Replied by dcarver220b on topic Replacement Coil Wiring question - eliminating ballast resistor
Please Log in or Create an account to join the conversation.
- kawaBCN
- Offline
- Elite Member
Less
More
- Posts: 259
- Thank you received: 99
1 year 4 days ago - 1 year 4 days ago #31780
by kawaBCN
RUN LIKE THE WIND¡¡¡
Replied by kawaBCN on topic Replacement Coil Wiring question - eliminating ballast resistor
I have four units of the XD05F model mounted on my bike.
and two short right-angle units of the model LD05F.
I found these models on Amazon
www.amazon.co.uk/NGK-YB05F-black-Plug-Cover/dp/B000R952H0
www.amazon.es/NGK-XD05F-Red-Plug-Covers-C4/dp/B001KO7BQQ
and two short right-angle units of the model LD05F.
I found these models on Amazon
www.amazon.co.uk/NGK-YB05F-black-Plug-Cover/dp/B000R952H0
www.amazon.es/NGK-XD05F-Red-Plug-Covers-C4/dp/B001KO7BQQ
RUN LIKE THE WIND¡¡¡
Last edit: 1 year 4 days ago by kawaBCN.
The following user(s) said Thank You: dcarver220b
Please Log in or Create an account to join the conversation.
- dcarver220b
- Topic Author
- Offline
- Sustaining Member
Less
More
- Posts: 883
- Thank you received: 195
1 year 6 hours ago #31792
by dcarver220b
Replied by dcarver220b on topic Replacement Coil Wiring question - eliminating ballast resistor
Please Log in or Create an account to join the conversation.
- kawaBCN
- Offline
- Elite Member
Less
More
- Posts: 259
- Thank you received: 99
1 year 5 hours ago - 1 year 5 hours ago #31793
by kawaBCN
Today I had time and I decided to go to the city of Barcelona, to a motorcycle parts store.
The six NGK spark plug caps cost me 42 euros in total, much cheaper than on EBAY or AMAZON.
I have also taken the opportunity to buy a nice and loud set of HELLA brand horns for 16 euros that adapt perfectly to our motorcycle.
RUN LIKE THE WIND¡¡¡
Replied by kawaBCN on topic Replacement Coil Wiring question - eliminating ballast resistor
Greetings again.I wonder why, back a few months ago, I couldn't find any. Now they are available again. Thanks for the post, I appreciate your helping me spend money!
Today I had time and I decided to go to the city of Barcelona, to a motorcycle parts store.
The six NGK spark plug caps cost me 42 euros in total, much cheaper than on EBAY or AMAZON.
I have also taken the opportunity to buy a nice and loud set of HELLA brand horns for 16 euros that adapt perfectly to our motorcycle.
RUN LIKE THE WIND¡¡¡
Last edit: 1 year 5 hours ago by kawaBCN.
The following user(s) said Thank You: dcarver220b, Kawboy
Please Log in or Create an account to join the conversation.
Time to create page: 0.201 seconds