Wheel Track Offset

Daro
Topic Author
Offline
Premium Member

5 years 5 months ago #24560 by Daro

Wheel Track Offset was created by Daro

Hi I'm wondering if Z13 was meant to have a wheel track offset, or is the frame, fork bend? hmm.. and what is the purpose of such thing. I have seen on the internet various information about it, even describing how to calculate this, so I'm wondering. My kawa has a rear wheel offset to the left 5 mm.

Attachments:

Please Log in or Create an account to join the conversation.

Bucko
Offline
Platinum Member

5 years 5 months ago #24567 by Bucko

Replied by Bucko on topic Wheel Track Offset

Does seem a little odd although a small offset wouldn't hurt anything (I don't think). Are you sure it's not a result of a high spot on the tire on one side and a low spot on the other? You could try making the measurement at a few places around the tire. A more accurate measurement might be to use a rim with no tire on it.

Hello from Canada's We(s)t coast.

The following user(s) said Thank You: Daro

Please Log in or Create an account to join the conversation.

Daro
Topic Author
Offline
Premium Member

5 years 5 months ago - 5 years 5 months ago #24569 by Daro

Replied by Daro on topic Wheel Track Offset

Hi Bucko, yeah it seems a little odd, a lot of people on the internet describe this "offset" as intended for some to me unknown reason. Lots of Triumph riders got this on there bikes, but to be honest I take this as manufacture fault. It would be cool if someone could confirm, that he's bike has or not some kind of offset. When I measure the bike I have turn the wheels 180 degrees against each other to eliminate possibility of error. When I ride at speed of 50 km/h, the bike tend to kind of go to the right when I don't hold the bars, and at high speed at about 150 km/h it starts to weave. I bought the second swing arm so I'm going to try to modify it and get the bike straight. Well that's the plan.

Last edit: 5 years 5 months ago by Daro.

Please Log in or Create an account to join the conversation.

strate6
Offline
Platinum Member
On An Adventure Before Dementia ! !

5 years 5 months ago #24570 by strate6

Replied by strate6 on topic Wheel Track Offset

May seem like a silly question...........but has your bike definitely got 1300 forks fitted ?
My 1979 KZ1300 has TWO axle pinch bolts at the bottom of each fork leg, but yours only seems to have ONE ?

Pete F
UK

Why Have Four When You Can Have Six ?

The following user(s) said Thank You: Daro

Please Log in or Create an account to join the conversation.

zed_thirteen
Offline
Platinum Member

5 years 5 months ago #24571 by zed_thirteen

Replied by zed_thirteen on topic Wheel Track Offset

strate6 wrote: May seem like a silly question...........but has your bike definitely got 1300 forks fitted ?
My 1979 KZ1300 has TWO axle pinch bolts at the bottom of each fork leg, but yours only seems to have ONE ?

Pete F
UK

I 'm pretty sure the double pinch bolt was only on the A1 forks and then they reduced it to single for all later models

1980 KZ1300 B2 Touring/A2
1990 ZZ-R1100 C1

The following user(s) said Thank You: Daro

Please Log in or Create an account to join the conversation.

strate6
Offline
Platinum Member
On An Adventure Before Dementia ! !

5 years 5 months ago #24572 by strate6

Replied by strate6 on topic Wheel Track Offset

Thanks for your reply.................I had a 1983 / A3 some years ago and that had Twin Bolts........but it was a UK spec model.

Pete F
UK

Why Have Four When You Can Have Six ?

Please Log in or Create an account to join the conversation.

Time to create page: 0.146 seconds