Hydraulic Clutch Slave

scotch
Topic Author
Offline
Sustaining Member

6 months 3 weeks ago #32478 by scotch

Hydraulic Clutch Slave was created by scotch

I did what some do when converting from cable to hydraulic. I bought a used slave.
despite a new seal and some work involved in removing some bore scratches, it had an annoying, intermittent weep.
I Just replaced it with a new "Oberon". I should have done this in the first place !

1980 KZ 1300 sr# KZT30A-009997
Always High - Know Fear !

Please Log in or Create an account to join the conversation.

Bucko
Away
Platinum Member

6 months 3 weeks ago - 6 months 3 weeks ago #32482 by Bucko

Replied by Bucko on topic Hydraulic Clutch Slave

I can't remember .... somebody here tried using one of those hydraulic clutch cable end adaptors - was that you Scotch?

Hello from Canada's We(s)t coast.

Last edit: 6 months 3 weeks ago by Bucko.

Please Log in or Create an account to join the conversation.

scotch
Topic Author
Offline
Sustaining Member

6 months 3 weeks ago #32485 by scotch

Replied by scotch on topic Hydraulic Clutch Slave

Not sure what you mean by "clutch cable end adaptors ".

1980 KZ 1300 sr# KZT30A-009997
Always High - Know Fear !

Please Log in or Create an account to join the conversation.

tackelhappy
Offline
Platinum Member

6 months 3 weeks ago #32488 by tackelhappy

Replied by tackelhappy on topic Hydraulic Clutch Slave

Do you have any spares/ who made the mounting plate -I’m looking for two ?

" If you can't say what you think, very soon you won't be able to think !
OKANAGAN FALLS. BC ,Canada

Please Log in or Create an account to join the conversation.

scotch
Topic Author
Offline
Sustaining Member

6 months 3 weeks ago #32489 by scotch

Replied by scotch on topic Hydraulic Clutch Slave

I made my "plate" from 6mm aluminum. No spares as I don't make them.

1980 KZ 1300 sr# KZT30A-009997
Always High - Know Fear !

The following user(s) said Thank You: tackelhappy

Please Log in or Create an account to join the conversation.

Kawboy
Offline
Sustaining Member

6 months 3 weeks ago #32491 by Kawboy

Replied by Kawboy on topic Hydraulic Clutch Slave

scotch wrote:
Not sure what you mean by "clutch cable end adaptors ".

Pretty sure he's talking about one of these "alternative" clutch slave cylinders

The following user(s) said Thank You: Bucko

Please Log in or Create an account to join the conversation.

Time to create page: 0.270 seconds