TOPIC:

i am after a pair of main stand springs, no longer available at any dealer and only made for the Z1300.
what free length are they ?
i am going to try and match them with something of the same length
any help or ideas thanks.

Ian

Ian,

Do you already have some springs or are they missing.?

I am sure I have a pair from one of my previous bikes somewhere that you can have. They will need a clean or costing to look new again.

If you can send me measurements from end to end & length of coiled spring part I can check at the weekend when I get home.

Pete F

Lafayette Powersports in LA shows they have one new one. NOS.

Their number is 337-232-5362

T.

Thanks Pete. i didnt get any in the Kit, it was only 90% there,
Thanks Toddh for looking as well.
i should have looked a bit harder before as i have found a pair on the German site
MCG
slapped wrist for me.

Ian,

Do the springs need to be brand new ?

If not I have a mate with 2 x Standard Z1300's with centre stands fitted.

I could get a look at his & compare them with what I have in my "spring box"

Pete F

Pete
No, they dont need to be new.
i plan to have them nickel plated.
new springs are 9.95 each