kz1300 banner

Welcome, Guest
Username: Password: Remember me
If you make pieces and parts or provide services for Kawasaki Sixes you may post links here to your business or product catalog. If you're just into 1300's and have found a business that you like to deal with post it up here.
  • Page:
  • 1
  • 2

TOPIC:

Boot, swing arm 49006-1020 2 years 4 months ago #24342

  • smiffy1956
  • smiffy1956's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 6
  • Thank you received: 0
Can you change this boot without taking the swing arm out ?

Cheers Richard

Please Log in or Create an account to join the conversation.

Boot, swing arm 49006-1020 2 years 4 months ago #24343

  • strate6
  • strate6's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • On An Adventure Before Dementia ! !
  • Posts: 1149
  • Thank you received: 355

Can you change this boot without taking the swing arm out ?

Cheers Richard


Unfortunately not,
Its Arm and Final Drive off first !

Pete F
UK (the totally non democratic country).
Why Have Four When You Can Have Six ?

Please Log in or Create an account to join the conversation.

Boot, swing arm 49006-1020 1 month 3 weeks ago #29687

  • Justin hemsley
  • Justin hemsley's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 1
  • Thank you received: 0
Are these boots still available, i need one in uk.

Please Log in or Create an account to join the conversation.

Boot, swing arm 49006-1020 1 month 3 weeks ago #29690

  • biltonjim
  • biltonjim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 767
  • Thank you received: 187
ebay member     lauri5574      has them.
The following user(s) said Thank You: Kawboy

Please Log in or Create an account to join the conversation.

Boot, swing arm 49006-1020 1 month 1 week ago #29742

  • LareNurminen
  • LareNurminen's Avatar Topic Author
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 290
  • Thank you received: 143
Hi,

I do have the boots and contrary to what Pete says, you can change it without removing the swing arm.  You have to remove the plate holding the rear brake master and then destroy the old boot so that you have access to shaft bolts.  The shaft then slides back enough to allow the boot to be pushed through and fitted in place.
You can mail me at: This email address is being protected from spambots. You need JavaScript enabled to view it.
Now in October, I will be in Stafford, if you can meet there, I can bring one along.

Brgs, Lauri

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.127 seconds
Powered by Kunena Forum