Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

79 rear master cylinder 7 years 8 months ago #13366

  • Jmthemailman
  • Jmthemailman's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 12
  • Thank you received: 1
Wanting to buy a rear master cylinder

Please Log in or Create an account to join the conversation.

79 rear master cylinder 7 years 8 months ago #13368

  • kwak1261
  • kwak1261's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 477
  • Thank you received: 72
how bad is the old body ?
if its still good inside then the rubbers from the front master cylinder are the same size
just carefully swap them from one piston to the other.

Ian
Z1300 A4 ZG1300 DFI X2
Z1261J GS1000S
Vmax1200 XT500
The following user(s) said Thank You: Jmthemailman

Please Log in or Create an account to join the conversation.

79 rear master cylinder 7 years 8 months ago #13383

  • dcarver220b
  • dcarver220b's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 771
  • Thank you received: 181
That is really good info to know.. Thanks for sharing.

Please Log in or Create an account to join the conversation.

79 rear master cylinder 7 years 8 months ago #13649

  • Jmthemailman
  • Jmthemailman's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 12
  • Thank you received: 1
Thanks for the information I successfully rebuilt my rear master cylinder using the seals from a front rebuild kit! !works great used the two seals, the spring and trimmed the dust boot an used it also.

Please Log in or Create an account to join the conversation.

79 rear master cylinder 7 years 8 months ago #13655

  • kwak1261
  • kwak1261's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 477
  • Thank you received: 72
another one sorted B) B) B)

although i didnt have to trim the dust boot, i just had to file the slot in the steel washer a bit bigger
but as long as it works..
Z1300 A4 ZG1300 DFI X2
Z1261J GS1000S
Vmax1200 XT500

Please Log in or Create an account to join the conversation.

Last edit: by kwak1261.

79 rear master cylinder 7 years 8 months ago #13678

  • Jmthemailman
  • Jmthemailman's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 12
  • Thank you received: 1
I used the original washer instead of reaming the new washer out. But great advice on the kit and the banjo pressure switch. Saved me alot of time an money. Plus it's a cool setup
The following user(s) said Thank You: kwak1261

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.120 seconds
Powered by Kunena Forum