Welcome, Guest
Username: Password: Remember me

TOPIC:

Big bore kit with cylinders and head 7 years 6 months ago #14504

  • dogfight
  • dogfight's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 43
  • Thank you received: 2
Dogfight here. My email is fullcirclerestorations@bell,net
Thanks

Please Log in or Create an account to join the conversation.

Big bore kit with cylinders and head 7 years 6 months ago #14513

  • Ledkz1300
  • Ledkz1300's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 717
  • Thank you received: 76
This makes it a 1370 instead of a 1286. So 1400 instead of 1300.

I am in Nova Scotia. I would hazard a guess it would cost about $200 to ship it to Ontario. It is 2 boxes. One weighs 25lbs and one weighs 42lbs.

If you are thinking of doing this as purely a performance gain, its not. Increasing displacement by itself is a marginal performance increase.

However, if you have a bike with low compression or it burns oil then this would be a good way to go about it. If the engine is worn out enough that the head has to come off to deal with it, there is no point in not machining the head. New valve seals. Valves seats and valves reground etc. Instead of just putting new rings in, now you get new rings, pistons and a freshly bored cylinder with a displacement gain + the machined head.

If we are going to do this outside of Ebay and payment through EMT I don't have to worry about the ebay fees and paypal fees I would let it go for $1400 USD plus shipping.

Please Log in or Create an account to join the conversation.

Big bore kit with cylinders and head 7 years 6 months ago #14565

  • frankle951
  • frankle951's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 30
  • Thank you received: 0
Well ebay has the piston kit for $250.00.
When you wakeup please give thanks to God !!!!!!!

Please Log in or Create an account to join the conversation.

Big bore kit with cylinders and head 7 years 6 months ago #14568

  • Ledkz1300
  • Ledkz1300's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 717
  • Thank you received: 76
Either its a different kit or it has come down a lot in price. This kit was $600

Please Log in or Create an account to join the conversation.

Big bore kit with cylinders and head 7 years 6 months ago #14575

  • frankle951
  • frankle951's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 30
  • Thank you received: 0
No eBay APP ID and/or Cert ID defined in Kunena configuration
When you wakeup please give thanks to God !!!!!!!

Please Log in or Create an account to join the conversation.

Big bore kit with cylinders and head 7 years 6 months ago #14576

  • frankle951
  • frankle951's Avatar
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 30
  • Thank you received: 0
Tried to put a link to ebay Bigbore kit for $250.00, it's hard put any link on here !!!!!!
When you wakeup please give thanks to God !!!!!!!

Please Log in or Create an account to join the conversation.

Last edit: by frankle951.
Time to create page: 0.163 seconds
Powered by Kunena Forum