Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC:

84 ZN1300 clutch 9 years 5 months ago #4908

  • Stoner
  • Stoner's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 62
  • Thank you received: 4
OK thanks
I will get one ordered
"I would rather ride two up with Lynn all day
than ride with the sinners or cry with the saints"

http://whitewolf-lif...s.blogspot.com/

Please Log in or Create an account to join the conversation.

84 ZN1300 clutch 9 years 5 months ago #4909

  • Toddh
  • Toddh's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 472
  • Thank you received: 65
If you go the Barnett route, let us know how it works. I have never used a carbon fiber clutch disk before.

It probably acts the same but don't assume anything.

T.
KZ1300 A-4 4TH 1300 IN 30 YEARS
KZ1000 D-3/ Z1R
ZX900 GPZ A-3
KZ750 E-1
K1200GT
CB750F 1978

Please Log in or Create an account to join the conversation.

84 ZN1300 clutch 9 years 4 months ago #5416

  • trikebldr
  • trikebldr's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 376
  • Thank you received: 38
I come to this thread late, but I recently bought an '85 ZN with a slipping clutch. It was suspected to have the wrong oil in it, too. I did an oil/filter change and most of the slippage went away. I pulled the plates out and scoured them with a brush and some laquer thinner to remove any residual film from the wrong oil. No more slippage.

Some of those "wonder oils" really do coat the metal with a slippery film and it won't just wash off with new oil. It has to be mechanically removed (scrubbed off!).

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.072 seconds
Powered by Kunena Forum