Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Technical Fourms
Engines
Coolant Hose ID
  • Page:
  • 1

TOPIC:

Coolant Hose ID 4 years 11 months ago #23906

  • strate6
  • strate6's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • On An Adventure Before Dementia ! !
  • Posts: 1149
  • Thank you received: 356
Can anyone confirm what the INTERNAL and EXTERNAL DIAMETER of the bottom coolant hose is (preferably in MM rather than INCH).

This is the short hose which goes between the front of the water pump and the bottom of the radiator.

Help appreciated as ever.

Pete F
UK
Why Have Four When You Can Have Six ?

Please Log in or Create an account to join the conversation.

Coolant Hose ID 4 years 11 months ago #23908

  • scotch
  • scotch's Avatar
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 1890
  • Thank you received: 831
1.25" / 32mm inside measurement - measured from an old OEM hose.

I used a (1) Goodyear # 61028 which provided both hoses (if cut correctly). Other off-the-shelf hoses could work as well, provided the bend is correct.
1980 KZ 1300 sr# KZT30A-009997
Always High - Know Fear !

Please Log in or Create an account to join the conversation.

Last edit: by scotch.

Coolant Hose ID 4 years 11 months ago #23912

  • strate6
  • strate6's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
  • On An Adventure Before Dementia ! !
  • Posts: 1149
  • Thank you received: 356
Thank you Scotch,

Like you, I have used regular everyday coolant hoses for the 1300 in the past, but just wanted to know the sizes before I remove them, so I can order and have new ones with clamps ready to replace.
Really appreciate your help.

Pete F
UK
Why Have Four When You Can Have Six ?

Please Log in or Create an account to join the conversation.
  • Page:
  • 1
Technical Fourms
Engines
Coolant Hose ID
Time to create page: 0.085 seconds
Powered by Kunena Forum