Welcome, Guest
Username: Password: Remember me
Electrical
  • Page:
  • 1
  • 2

TOPIC:

Wiring issue 9 years 7 months ago #4289

  • zed_thirteen
  • zed_thirteen's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 528
  • Thank you received: 137
glad you got it sorted.

On my bike there are a pair of black and white leads with bullet connectors under the tank near the front on the left hand side.
1980 KZ1300 B2 Touring/A2
1990 ZZ-R1100 C1

Please Log in or Create an account to join the conversation.

Last edit: by zed_thirteen. Reason: change "started" to "sorted"

Wiring issue 9 years 7 months ago #4290

  • Torque59
  • Torque59's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • POTEST ALITER SUBVENIRI NON POTEST PRO CUBICUS
  • Posts: 136
  • Thank you received: 13
Thanks again. I will recheck and see what I can find.
Restored an 1976 Suzuki GT550B
Restored an 1982 Kawasaki Z1300 A4.
Also rides a 2014 Triumph Rocket Roadster, 2300cc of pure fun.

POTEST ALITER SUBVENIRI NON POTEST PRO CUBICUS

Please Log in or Create an account to join the conversation.

Wiring issue 9 years 7 months ago #4292

  • kza13
  • kza13's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 671
  • Thank you received: 97
I never found any wires to connect my clutch switch, not that I looked too hard, I just wanted the switch to fill the hole in the lever and to make the bike look original, will look closer next time I have the tank off, same as the oil level sensor, I have the sensor, motor has the later model sump, but no wire to plug it into, early model harness I guess, but I still have the wire going nowhere, cheers
after tuesday even the calendar goes WTF
1979 KAWASAKI Z1300 A1 WITH A DJP SIDECAR
Frame No: KZT3OA003911
Engine No: KZT3OAE004153
Location: Queensland Australia

Please Log in or Create an account to join the conversation.

Wiring issue 9 years 7 months ago #4296

  • Torque59
  • Torque59's Avatar Topic Author
  • Offline
  • Premium Member
  • Premium Member
  • POTEST ALITER SUBVENIRI NON POTEST PRO CUBICUS
  • Posts: 136
  • Thank you received: 13
:woohoo: Another mystery solved. Have been rechecking the connectors where I would have expected to see the two black/white wires for the clutch cut out to be.
Found that someone at some stage has cut them both off and spliced them together and bound them back into the main wiring loom with tape.
Obviously whoever had the bike previously didn't like having to pull the clutch lever in every time the bike was started.
Might leave it like yours Pete, have the switch in with wires leading to nowhere.

Not much left to do now.

Have to get an exhaust, rear shocks, caps and retainers for the coils, leads. Then it's all go.........hopefully
Restored an 1976 Suzuki GT550B
Restored an 1982 Kawasaki Z1300 A4.
Also rides a 2014 Triumph Rocket Roadster, 2300cc of pure fun.

POTEST ALITER SUBVENIRI NON POTEST PRO CUBICUS

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.070 seconds
Powered by Kunena Forum