TOPIC:

Thank you, Ted. I assume with the Pingle I'd have to do some modification to the tank? I prefer to keep everything as close to stock as possible. Not necessarily NOS, but if there is a way to put a compatible replacement in that doesn't requite shaving the tank, that would be ideal. 


www.amazon.com/Kawasaki-Concours-1000-ZG...d_i=B0B1J3B5WC&psc=1

This looks like it might fit. Just wanted to know if anyones tried this or something like it before I make the purchase. 

Thanks again!

I should have done a little more research on the Pingle. I guess this is the adaptor plate for the kz750/1000/1300

www.denniskirk.com/pingel/3-8-in-npt-44m..._stF9rMaAjceEALw_wcB

I should have been more thorough as well when I suggested it, but it's been some time since I looked at Pingle. I just remembered them and thinking that I would probably go with them if mine crapped out.

They are available from the usual suppliers. In this case Zed-Parts,
The Amazon part appears to be very close in appearance.

51023-1028PP Fuel Tap | zedparts (zed-parts.com)

I’m still pretty new to the Zed World. Thank you for the link!!  

I replaced the fuel tap on my 79 A1 with this from Z power 

www.z-power.co.uk/fuel-tap-z1300gtr1000