TOPIC:

Need a measurement, may have a bent frame? 9 years 7 months ago #4702

Tyler Topic Author Offline Elite Member Posts: 251 Thank you received: 46	Working on cleaning up the bike, after I took the rear fender and tail light off it appears the right side of the frame is pushed in at the back. Would make sense if the bike ever fell over. Not sure if it look off, or if it really is off. Can anyone measure the distance between the ends of the frame rails at the back for me? 1981 KZ1300 Attachments:
	Please Log in or Create an account to join the conversation.

scotch Offline Sustaining Member Posts: 1890 Thank you received: 831	I measure 6.375" on my straight frame. That's the inside measurement between the two tubes just in-front of the weld-bead at the end. 1980 KZ 1300 sr# KZT30A-009997 Always High - Know Fear !
	Please Log in or Create an account to join the conversation.

Tyler Topic Author Offline Elite Member Posts: 251 Thank you received: 46	Thank you that was a big help. Must be an optical delusion, after taking some more measurements there is no problem. The back of the frame tapers in a bit, I could have sworn the right side tapered in too far... looks to be ok now. Again thanks scotch 1981 KZ1300
	Please Log in or Create an account to join the conversation.