Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC:

Stator rubber grommet 10 years 2 months ago #1117

  • Mrnlaguna
  • Mrnlaguna's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 12
  • Thank you received: 0
Good Morning Sixer's Does anyone have a source for the rubber grommet that seals the three yellow wires coming through the case cover from the stator? Mine continues to leak oil even after a thorough cleaning of the wires and the grommet with MEK then a new gasket and liberal amounts of black high temp silicone.

Thanks, Mike

Please Log in or Create an account to join the conversation.

Stator rubber grommet 10 years 2 months ago #1118

  • strate6
  • strate6's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • On An Adventure Before Dementia ! !
  • Posts: 1149
  • Thank you received: 356
Hello mate.

MCG DE Z1300 Germany sell them.

Pete F
Why Have Four When You Can Have Six ?
The following user(s) said Thank You: Mrnlaguna

Please Log in or Create an account to join the conversation.

Stator rubber grommet 10 years 2 months ago #1123

  • Mrnlaguna
  • Mrnlaguna's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 12
  • Thank you received: 0
Thanks Pete, a life saver you are! been scratchin' my head thinking I'd make one or modify one from another bike, don't want to be slip sliding in my own oil.......or anyone else's for that matter, thanks again, Mike

Please Log in or Create an account to join the conversation.

Stator rubber grommet 10 years 2 months ago #1125

  • KZQ
  • KZQ's Avatar
  • Offline
  • Administrator
  • Administrator
  • Lifelong Rider Suffering Through MBD
  • Posts: 1026
  • Thank you received: 274
Hi Mike, The grommet you're struggling with is always tough to seal. As you've described getting the oil off of the old grommet and wiring is critical. I've been using Hondabond HT with great results even with an old failed grommet.





Hope this helps.

Bill
1947 Indian Chief, 1968 BSA Shooting Star, 1970 BSA 650 Lightning, 1974 Kawasaki W3, 1976 KZ900 A4, 1979 KZ750 B4, 1979 KZ750 B4 Trike, 1980 KZ550, 1981 KZ1300, 1982 KZ1100 Spectre, 1985 Kawasaki ZN1300, 1987 Yamaha Trail Way, 2000 Honda Valkyrie Tourer, 1981 GL 1100, 2009 Yamaha RoadLiner S
Attachments:
The following user(s) said Thank You: Mrnlaguna

Please Log in or Create an account to join the conversation.

Stator rubber grommet 10 years 1 month ago #1789

  • Mrnlaguna
  • Mrnlaguna's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 12
  • Thank you received: 0
Thanks Bill, where would we be without Honda,Yamaha,Kawasaki or good old Three Bond! Need to order some on line as I am also building a 72' H2 motor. Used black RTV on the big six's stator grommet after a good de-grease and clean, lasted about a week......back to the drip!

Please Log in or Create an account to join the conversation.

Stator rubber grommet 9 years 5 months ago #4839

  • Mrnlaguna
  • Mrnlaguna's Avatar Topic Author
  • Offline
  • Junior Member
  • Junior Member
  • Posts: 12
  • Thank you received: 0
Hey Pete, Mike here, it's been a while since you sent me the info on the Stator wire grommet for the 1300. Do you have any other info on MCG De 1300 in Germany, can't seem to pull them up on my computer, tried re-sealing with no luck.
Thanks, Mike

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
Time to create page: 0.094 seconds
Powered by Kunena Forum