TOPIC:

Hi help please

trying to sort out LHS Handle bar switch on my A3 project

the switch that came in the many boxes of bits that makes up the bike has some wires broken off

I want to re-solder the wiring diagram is a bit vague or I am not understanding it

I have a lose white and red wire from indicator switch cant see where it was soldered red white one okay

I have 3 wires from pass /horn lose b/w brown and R/B not sure how they fit to the switch

can any one please help OR have any ideas on alternative switch gear to locate as most of the z13 ones are rare and knackered

Thanks

Not sure if this will help. Have a look at post #9718

www.kz1300.com/index.php/forum/welcome-m...d-solder-joints#9718

Hi thanks for the link can't see the white and red wire on there bugger

Or the horn / pass light wires

Think splash out on new switch gear from z1300 de but would rather fix original

Wire diagram shows horn switch seperate from pass light so no way of knowing where to solder back on

But thank and Merry Christmas

Hi Ok see pics.
Looking from the switch at the back. the top 3 connections left to right are
TOP
Grey, Orange then Green
BOTTOM left to right
White/Red, Red/White then Black

Last pic viewed from back of switch Left to right
Black, White/Green and Black and White.

Am in the UK Devon give me a call if you need anymore
Cheers
Mark

Hi,

I am currently trying to figure out how to eliminate my left handlebar switch. If I can manage that, you are welcome to mine. It's in good shape and seems to be fully functioning, but a bit sun-faded. Just cover the shipping.