TOPIC:

Afternoon Folks,

Apologies in advance for what seems a stoopid question:
The diagram on partzilla seems to show threads - is this why i can't dislodge with rubber mallet from 1981 KZ1300 to replace mechanical seal?

many thanks
chris h

www.partzilla.com/parts/search/Kawasaki/...ATER+PUMP/parts.html

I think you are referring to the recess for the O - ring that seals the cover to the block.
If it won't come out remember its been in there a long time and may need some more persuasion.
the cover is held in by two bolts.

hope this helps

I can confirm that that cover simply pulls straight off. However, most of that whole assembly can get really crusty, especially if it's been setting a bit.

Also, you'll get to a point where you've got two or three philips screws that need to come out. You'll almost definitely need some kind impact driver to get them out.

Much appreciated Gents,

I'll persevere and circle back with the result

many thanks
chris h

So i was able to obtain one for a reasonable price & shipping - recommend these salvage yards for hard to find parts:
houstonmotorcyclesalvage.net/
Steve's cycles in GA
Cycles R Us in OH

many thanks
chris h

forgot to mention Land's Cycles to HOU too!