Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

Need 1 part# - 92022C carb-slide duracon washer 8 years 7 months ago #8666

  • scotch
  • scotch's Avatar Topic Author
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 1887
  • Thank you received: 830
A set of carbs I'm rebuilding is missing one diaphram slide washer (spacer). Anybody have one ? P.M. me if you can supply - Thanks,scotch

The requirement for this spacer/washer was noted in the '79 carb rebuild tutorial. It should be additionally noted that the omission of this part drops the needle height the equivalent of one notch on the 5-slot needle which would lean the high end.

1980 KZ 1300 sr# KZT30A-009997
Always High - Know Fear !
Attachments:

Please Log in or Create an account to join the conversation.

Last edit: by scotch.

Need 1 part# - 92022C carb-slide duracon washer 8 years 7 months ago #8676

  • biltonjim
  • biltonjim's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 916
  • Thank you received: 240
I hope somebody has one for you, scotch. Presumably it is not feasible to home-make one. What is Duracon?

Please Log in or Create an account to join the conversation.

Need 1 part# - 92022C carb-slide duracon washer 8 years 7 months ago #8683

  • scotch
  • scotch's Avatar Topic Author
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 1887
  • Thank you received: 830
Thanks to the generosity of a forum member i have one on the way. Duracon is a name given the fibre-material the spacer is made from. It's temperature and fuel/oil resistant and is softer then the aluminum that it buffers. Having them in place and why is noted in the '79 carb rebuild. tutorial.
1980 KZ 1300 sr# KZT30A-009997
Always High - Know Fear !
The following user(s) said Thank You: biltonjim

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.070 seconds
Powered by Kunena Forum