Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

Fuel line conversion and Over-flow modification 8 years 11 months ago #7243

  • scotch
  • scotch's Avatar Topic Author
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 1887
  • Thank you received: 830
Recently I've received a surprising number of requests from carb'd guys regarding them wanting to send me their carbs so i can do the Float-bowl Over-flow conversion and/or the single or double Fuel-line conversion.

......and just now received 2 more ! Who'd of thunk !

I'm flattered but the short answer is, "No, thank You"! The details are well documented here and are easily done with simple tools and basic skills.

As much as I enjoy helping and have been responding to (every) a surprising number of personal emails and P.M.'s I feel compelled to re-iterate the following, as I am not responding any longer:

3.5 turns - anything significantly more or less indicates other issues. I don't know what your specific problems are so I can't help with any certainty.

7.5 mm. Details are in the manual and all over the inter-net.


Those of you that know, will understand. Those who understand, certainly know !

THANKS, appreciate the break.
1980 KZ 1300 sr# KZT30A-009997
Always High - Know Fear !

Please Log in or Create an account to join the conversation.

Fuel line conversion and Over-flow modification 8 years 11 months ago #7244

  • lucasind
  • lucasind's Avatar
  • Offline
  • Premium Member
  • Premium Member
  • Posts: 112
  • Thank you received: 13
Hello , For anyone looking for the floatbowl overflow modification,you can send your floatbowls to this co. after contacting them.
sites.google.com/site/shoodabenengineering/ click on"pricing"....I think they charge $80.
The following user(s) said Thank You: scotch

Please Log in or Create an account to join the conversation.

Fuel line conversion and Over-flow modification 8 years 10 months ago #7486

  • scotch
  • scotch's Avatar Topic Author
  • Offline
  • Sustaining Member
  • Sustaining Member
  • Posts: 1887
  • Thank you received: 830
Regarding: .....<For anyone looking for the floatbowl overflow modification,you can send your floatbowls to this co. after contacting them.
sites.google.com/site/shoodabenengineering/ click on"pricing"....I think they charge $80.>


Note that this is for a "traditional" drain for a carb that has a Siamese float, allowing the drain to be inserted in the center of the bowl, extending upward. This will not work on the "1300" carbs.

It will be interesting to see if they "boot-leg" my idea though !
1980 KZ 1300 sr# KZT30A-009997
Always High - Know Fear !

Please Log in or Create an account to join the conversation.

Last edit: by scotch.
  • Page:
  • 1
Time to create page: 0.076 seconds
Powered by Kunena Forum