Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

Help!! 7 years 9 months ago #13324

  • jbleavins
  • jbleavins's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
Forgive my ignorance but I need to know what goes in this reservoir. Just bought this bike and it runs out strong but this res is plumb dry. Is it supposed to be? Right in the middle of picture.
Attachments:

Please Log in or Create an account to join the conversation.

Help!! 7 years 9 months ago #13326

  • KZQ
  • KZQ's Avatar
  • Offline
  • Administrator
  • Administrator
  • Lifelong Rider Suffering Through MBD
  • Posts: 1026
  • Thank you received: 274
That reservoir is part of the cooling system. You can download a manual from the home page of this site.
Welcome to KZ1300.COM
KZQ
1947 Indian Chief, 1968 BSA Shooting Star, 1970 BSA 650 Lightning, 1974 Kawasaki W3, 1976 KZ900 A4, 1979 KZ750 B4, 1979 KZ750 B4 Trike, 1980 KZ550, 1981 KZ1300, 1982 KZ1100 Spectre, 1985 Kawasaki ZN1300, 1987 Yamaha Trail Way, 2000 Honda Valkyrie Tourer, 1981 GL 1100, 2009 Yamaha RoadLiner S
The following user(s) said Thank You: jbleavins

Please Log in or Create an account to join the conversation.

Help!! 7 years 9 months ago #13331

  • jbleavins
  • jbleavins's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
So....should have antifreeze/water mix in it?

Please Log in or Create an account to join the conversation.

Help!! 7 years 9 months ago #13341

  • KZQ
  • KZQ's Avatar
  • Offline
  • Administrator
  • Administrator
  • Lifelong Rider Suffering Through MBD
  • Posts: 1026
  • Thank you received: 274
Yes 50/50. I also use the wetting agent additive.

Bill
1947 Indian Chief, 1968 BSA Shooting Star, 1970 BSA 650 Lightning, 1974 Kawasaki W3, 1976 KZ900 A4, 1979 KZ750 B4, 1979 KZ750 B4 Trike, 1980 KZ550, 1981 KZ1300, 1982 KZ1100 Spectre, 1985 Kawasaki ZN1300, 1987 Yamaha Trail Way, 2000 Honda Valkyrie Tourer, 1981 GL 1100, 2009 Yamaha RoadLiner S

Please Log in or Create an account to join the conversation.

Help!! 7 years 9 months ago #13343

  • BigSix
  • BigSix's Avatar
  • Offline
  • Platinum Member
  • Platinum Member
  • Posts: 764
  • Thank you received: 221
All,

to my understanding this is the compensation tank for the colling system, means that it should be half full/empty as standard. Once the bike is warm it might be a bit fuller, once the engine cools down it will suck in whatever it needs from this little tank.

If you would fill it up to the top the engine would press out some of it when hotter, so you'd better just do half of it.

regards,


Holger
Z1300 A1/ KZT30AG built 1979
frame KZT30A 004285
engine KZT30A 000288
location: borderland-triangle France/ Germany/ Switzerland, Europe

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
Time to create page: 0.078 seconds
Powered by Kunena Forum